ProAc Response DB3

Small high quality loudspeakers have become very popular, being less of an eyesore whilst reproducing some quite respectable sound quality. The new Response DB3 has a similar cabinet size to the Response DB1. There are structural and visual differences to the cabinet of the Response DB3, it also employs a new bass driver and crossover which have been chosen for their exceptional performance with a more affordable price.

The new Response DB3 has a wonderfully rich and extended bass quality, loaded with a single reflex port in the rear of the cabinet. The tweeter is our ProAc one inch soft dome used in many other ProAc designs. This one inch silk dome has a superbly flat response with electrostatic type detail and sweetness to its qualities.

A newly designed bass driver with a special surround and dust cap, allows extra information from the voice coil giving a smoother transition of frequencies to our one inch dome tweeter. The bass driver is a long throw design with a raised spider and linear motor system. The new bass driver is responsible for the remarkable bass extension.

• Nominal Impedance
  8 ohms

• Recommended Amplifiers
  20 to 100 watts

• Frequency Response
  38Hz to 30kHz

• Sensitivity
  88.5 db linear for 1 watt at 1 metre

• Bass/Midrange
  ProAc 5 inch long throw unit with mikapulp cone and transparent dust cap.

• Tweeter
  ProAc 1 inch silk dome with special coolant.
  

• Crossover
  Finest components on dedicated circuit board. Multistrand oxygen free copper cable throughout. Split for optional Bi wiring or Bi amplification

• Dimensions
  12.5" (320mm) high, 7.28" (182mm) wide, 10.4" (280mm)

• Weight
  19.6lbs (8.8 Kgs) each

• Mode
  Stand mounted

• Grille
  Acoustically transparent crimplene