Naim Nait 50 Limited Edition
NAIT 50 is the worthy successor of NAIT 1, Naim’s integrated amplifier released in 1983. Our engineers have been sure to preserve the DNA of NAIT 1, whilst making technical improvements to the circuits thanks to their unique expertise. Some of the new features on this anniversary edition include: a 1/4” (6.35mm) jack headphone output, so you can enjoy all types of listening. Behind its sleek design, NAIT 50 also delivers top notch sound quality.
Fully regulated 25W of power per channel, three input selections (MM phono, Stream, Aux), a discrete transistor MM phono stage: NAIT 50 combines power, performance and versatility. It reproduces the most exacting dynamics with all the confidence and authority we have come to expect from a Naim amplifier. It can be linked with all loudspeaker types, as well as a streamer, for the ultimate hi-fi system.
Output Power:
25Watts 8O @0,1% THD+N
40Watts 4O @0,1% THD+N
60Watts 2O @1% THD+N
Headphone output power:
1.5Watts 16O
Gain:
Phono: +40dB (@1kHz RIAA)
Pre-amplication (and headphone): +16dB
Power Amplifier: +29dB
Inputs:
1 x RCA pair (47kO), in MM phono level 5mV
2 x 5-pin DIN (stereo, 47kO), line level
MM Phono:
47kO and 100pF
Frequency Response:
Line: -3dB @ 4Hz to 45kHz
Phono: -3dB @ 6Hz to 30kHz
Peak current in 1O (1kHz 1mS):
Peak +/- 15 (peak power at 225W)
THD+N at 2/3 full power 8O @1kHz:
0.015%
Clipping input signal (maximum volume):
Line: 88mV Phono: 710mV
Signal/noise ratio: ref. 1Watt 8O, A-weighted:
Line: 80dB, 1V input
Phono: 78dB, 5mV input
Signal/noise ratio: ref. 25Watt 8O, A-weighted:
Line: 93dB, 1V input
Phono: 84dB, 5mV input
Crosstalk:
Line: 85dB, (at 1kHz, 25Watts 8O)
Phono: 80dB
8O damping factor:
36
Typical use consumption:
20W
Stand-by mode consumption:
<0.5W
Mains Supply:
115V or 230V, 50/60Hz
Dimensions (H x L x D):
3 3/8 x 81/8 x 125/8" (8.7x20.7x32.1cm)
Weight:
9.9lbs (4.5kg)